Steel beams

Steel beams in countless shapes and forms, each with specific applications and advantages. Swanenberg IJzer Groep has a large stock of all versions of wide flange H beams, IPE steel beams, hollow sections, and solid shafts for the most diverse construction purposes.

Standard dimensions and bespoke

Whether for temporary bridge or viaduct support constructions, purlins, sheet piling, or hall construction, our steel beams, steel sheets and plates, manufacturer’s plates, hollow sections, and rounds form the basis for any successful project. They can always be provided in standard dimensions or bespoke and ready for use.

View options

Options

HEA sections

The light variant of H beam steel, which can be recognized by a somewhat thinner flange and an H-shaped cross-section. The last letter represents the thickness of the flange, wherein A represents the thinnest version of H sections. The height of the beam is lower than the flange width in HEA beams. This applies up to the maximum flange width of 300 mm. After that, the height of the steel beam increases and the flange width remains 300 mm.

h-profiel-staalbalk-swanenberg

HEA Weight kg/m Dimensions in mm
Height Width Flange tw Flange tf r
100 17,1 96 100 5 8 12
120 20,3 114 120 5 8 12
140 25,2 133 140 5,5 8,5 12
160 31,0 152 160 6 9 15
180 36,2 171 180 6 9,5 15
200 43,2 190 200 6,5 10 18
220 51,5 210 220 7 11 18
240 61,5 230 240 7,5 12 21
260 69,5 250 260 7,5 12,5 24
280 77,9 270 280 8 13 24
300 90,0 290 300 8,5 14 27
320 99,5 310 300 9 15,5 27
340 107,1 330 300 9,5 16,5 27
360 114,2 350 300 10 17,5 27
400 127,4 390 300 11 19 27
450 142,7 440 300 11,5 21 27
500 158,0 490 300 12 23 27
550 169,2 540 300 12,5 24 27
600 181,4 590 300 13 25 27
650 193,7 640 300 13,5 26 27
700 207,9 690 300 14,5 27 27
800 228,3 790 300 15 28 30
900 256,9 890 300 16 30 30
1000 277,2 990 300 16,5 31 30

HEB sections

The intermediate variant of H beam steel. Compared to the HEA beam, the HEB beam has a greater load capacity and the flange is somewhat heavier and wider than in the HEA beam. The flange width is equal to the height up to 300 mm. Above that, the flange width is fixed at 300 mm.

h-profiel-staalbalk-swanenberg

HEB Weight kg/m Dimensions in mm
Height Width Flange tw Flange tf r
100 20,8 100 100 6 10 12
120 27,3 120 120 6,5 11 12
140 34,4 140 140 7 12 12
160 43,5 160 160 8 13 15
180 52,2 180 180 8,5 14 15
200 62,5 200 200 9 15 18
220 72,9 220 220 9,5 16 18
240 84,8 240 240 10 17 21
260 94,8 260 260 10 17,5 24
280 105 280 280 10,5 18 24
300 119,3 300 300 11 19 27
320 129,5 320 300 11,5 20,5 27
340 136,6 340 300 12 21,5 27
360 144,8 360 300 12,5 22,5 27
400 158 400 300 13,5 24 27
450 174,3 450 300 14 26 27
500 190,6 500 300 14,5 28 27
550 202,8 550 300 15 29 27
600 216,1 600 300 15,5 30 27
650 229,3 650 300 16 31 27
700 245,6 700 300 17 32 27
800 267 800 300 17,5 33 30
900 296,6 900 300 18,5 35 30
1000 320 1000 300 19 36 30

HEM sections

The strongest and heaviest variant of H beam steel. The HEM beam is bigger and heavier than HEA and its flange is thicker, for a heavier load.

h-profiel-staalbalk-swanenberg

HEM Weight kg/m Dimensions in mm
Height Width Flange tw Flange tf r
100 42,6 120 106 12 20 12
120 53,1 140 126 12,5 21 12
140 64,5 160 146 13 22 12
160 77,8 180 166 14 23 15
180 90.,6 200 186 14,5 24 15
200 105 220 206 15 25 18
220 119,3 240 226 15,5 26 18
240 160 270 248 18 32 21
260 175,3 290 268 18 32,5 24
280 192,7 310 288 18,5 33 24
300 242,6 340 310 21 39 27
320 249,7 359 309 21 40 27
340 252,8 377 309 21 40 27
360 254,8 395 308 21 40 27
400 260,9 432 307 21 40 27
450 268,1 478 307 21 40 27
500 275,2 524 306 21 40 27
550 283,4 572 306 21 40 27
600 290,5 620 305 21 40 27
650 298,6 668 305 21 40 27
700 306,8 716 304 21 40 27
800 323,1 814 303 21 40 30
900 339,4 910 302 21 40 30
1000 355,7 1008 302 21 40 30

IPE sections

The lightest variant of steel beam manufactured to European dimensions. IPE beams are often employed for construction purposes. The flange width is approximately half the beam height in IPE steel beams.

ipe-profiel-staalbalk-swanenberg

IPE Weight kg/m Dimensions in mm
Height Width Flange tw Flange tf r
80 6,2 80 46 3,8 5,2 5
100 8,3 100 55 4,1 5,7 7
120 10,6 120 64 4,4 6,3 7
140 13,2 140 73 4,7 6,9 7
160 16,2 160 82 5 7,4 9
180 19,2 180 91 5,3 8 9
200 22,9 200 100 5,6 8,5 12
220 26,7 220 110 5,9 9,2 12
240 31,3 240 120 6,2 9,8 15
270 36.8 270 135 6,6 10,2 15
300 43,1 300 150 7,1 10,7 15
330 50,1 330 160 7,5 11,5 18
360 58,2 360 170 8 12,7 18
400 67,6 400 180 8,6 13,5 21
450 79,1 450 190 9,4 14,6 21
500 92,5 500 200 10,2 16 21
550 108,1 550 210 11,1 17,2 24
600 124,4 600 220 12 19 24

UNP sections

Hot rolled steel channels, available up to a height of 400 mm. Steel beams with a UNP section can be recognized by the tapered flanges.

unp-balk-staal-swanenberg

UNP Weight (kg/m) Dimensions in mm
Height Width Flange tw Flange tf
30 4,35 30 33 5 7
40×20 2,92 40 20 5 5
40 4,96 40 35 5 7
50×25 3,93 50 25 5 6
50 5,70 50 38 5 7
60×30 5,17 60 30 6 6
65 7,23 65 42 5,5 7,5
80 8,90 80 45 6 8
100 10,8 100 50 6 8,5
120 13,7 120 55 7 9
140 16,4 140 60 7 10
160 19,2 160 65 7,5 10,5
180 22,5 180 70 8 11
200 25,8 200 75 8,5 11,5
220 30 220 80 9 12,5
240 33,9 240 85 9,5 13
260 38,7 260 90 10 14
280 42,6 280 95 10 15
300 47,1 300 100 10 16
320 60,7 320 100 14 17,5
350 61,8 350 100 14 16
380 64,4 380 102 13,5 16
400 73,2 400 110 14 18

Hollow sections

From square to asymmetrical tubes, both welded and seamless, cold and hot rolled, we provide hollow sections for various construction purposes.

Solid shafts

Solid shafts in various grades and dimensions, both round and rectangular, available immediately from stock. These solid shafts are often employed for construction purposes in machine construction and turning shops.

Bespoke steel sheets and plates

Swanenberg IJzer Groep processes steel sheets and plates of various grades into partitions, head plates, and all types of bespoke sheet and plate metal work. These can then be welded to our beams and sections. For this we have in-house flame and plasma cutting tables, enabling us to fulfil all the market needs.

Customization

Swanenberg provides a large range of possibilities and has in-house facilities to process all types and sizes of steel products, and to customize and deliver them. Here are the different services we provide for steel beams:

If you have questions or would like to receive more information about our working method or the steel beams, you can reach us on telephone number: +31 486 469 120.

Contact us